Sony bvm-l230 Operation Manual page 95

Hide thumbs Also See for bvm-l230:
Table of Contents

Advertisement

The Controller Upgrade screen is displayed, and the
current version is indicated.
For the password, see Password (page 73) of the
System Configuration menu.
4
Select the item to upgrade from Software Upgrade or
Kernel Upgrade.
After about 10 seconds, the old and new software
versions or kernel version, and the message to confirm
that you wish to execute the upgrade are displayed.
Display example
Controller software will be upgraded and controller
will restart.
Are you sure?
5
Confirm the data version and press the ENTER (Ent)
button.
Upgrading starts.
When a version earlier than 1.2 of the
software for the controller is upgraded
When upgrading starts, the dot (indicator) lights as
moving from left to right in the display window of the
controller. The dot may stop during upgrading, but the
data are being upgraded correctly.
It takes about 1 minute to upgrade the controller.
SINGLE
GROUP
When version 1.2 or later of the
software for the controller is upgraded
When the upgrading starts, the indicator lights as
turning clockwise in the display window of the
controller. The indicator may stop during upgrading,
but the data are being upgraded correctly.
It takes about 1 minute to upgrade the controller. After
upgrading, all indicators light for about 1 second.
REMOTE
SINGLE
GROUP
ALL
ALL
SINGLE
GROUP
Notes
• Do not remove the "Memory Stick PRO" from the
Memory Stick insertion slot during upgrading or
disconnect the LAN cable between the monitor and
controller.
• Do not turn off the power of the monitor and
controller during upgrading.
After completion of upgrading, the system is restarted.
The network between the monitor and controller is
reconnected, and you can operate the controller.
When the upgrade sequence does not move forward
correctly, the error message "Err" is displayed in the
display window. If this error message is displayed,
contact your Sony representative.
6
Exit the Controller Upgrade menu, select the
Controller Upgrade menu again, and confirm that the
version of the selected item has been upgraded.
Upgrading the Monitor and Controller
REMOTE
SINGLE
GROUP
ALL
ALL
95

Advertisement

Table of Contents
loading

Table of Contents