Operating Conditions; Accessories Supplied; Optional Accessories - Sony bvm-l230 Operation Manual

Hide thumbs Also See for bvm-l230:
Table of Contents

Advertisement

*2 The BVM-L230 individual chromaticity
points. The widest color space setting of
the signal reproduced by the BVM-L230
x
y
R
0.661
0.313
G
0.233
0.664
B
0.154
0.064
(Typical)
*3 For displaying the color gamut of the
wide color space mode S-GAMUT,
which is available for the F23 Digital
Cinematography Camera

Operating conditions

Temperature
0 °C to 35 °C (32 °F to 95 °F)
Optimum temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity
0% to 90% (no condensation)
Pressure
700 hPa to 1060 hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Humidity
0% to 90%
Pressure
700 hPa to 1060 hPa

Accessories supplied

AC power cord (1)
AC plug holder (1)
Cable holder (1)
Bracket (1)
Connection cable for color temperature adjustment (1)
Operation Manual (Japanese, English, each 1)
CD-ROM (1)
Using the CD-ROM Manual (1)

Optional accessories

BKM-16R Monitor Control Unit
BKM-37H Controller Attachment Stand
SMF-700 Monitor Interface Cable, Sony
BKM-23M Monitor Protection Panel
BKM-220D SDI 4:2:2 Input Adaptor (with serial number
2100001 or higher)
BKM-227W NTSC/PAL Input Adaptor
BKM-229X Analog Component Input Adaptor (with serial
number 2200001 or higher)
BKM-243HS HD/D1-SDI Input Adaptor (with serial
number 2108355 or higher)
BKM-244CC HD/SD-SDI Closed Caption Adaptor
Note
BKM-220D: This equipment may not meet the
requirement for the electromagnetic interference standard
if an input adaptor with a serial number that is not
designated is installed.
BKM-229X: This equipment may not work correctly or
you may not be satisfied with the performance if an input
adaptor with a serial number that is not designated is
installed.
BKM-243HS: This equipment may not meet the
requirement for the electromagnetic interference standard
or work correctly, or you may not be satisfied with the
performance if an input adaptor with a serial number that is
not designated is installed.
Design and specifications are subject to change without
notice.
Notes
• Always make a test recording, and verify that it was
recorded successfully.
SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF
FAILURE OF THIS UNIT OR ITS RECORDING
MEDIA, EXTERNAL STORAGE SYSTEMS OR
ANY OTHER MEDIA OR STORAGE SYSTEMS
TO RECORD CONTENT OF ANY TYPE.
• Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
Page 97

Advertisement

Table of Contents
loading

Table of Contents