Sony bvm-l230 Operation Manual page 64

Menu
HD-SDI YPbPr 12bit
HD-SDI RGB 12bit
Post-Process Detection
Detection
Pixel Threshold
Signal Level
Zebra Pattern
Line
Modulation
Black Detail Setting
Clip Indicator
Zebra Pattern
Line
Modulation
Capture
Load
64
Display Function Menu
Function and operation ([
When two BKM-243HS or BKM-244CC are installed in the OPTION 1 and 2 or OPTION 3
and 4 option slots, you can select this item.
Upper Limit (upper limit)
Y: 0000 to 4095 [3935]
Pb: 0000 to 4095 [4019]
Pr: 0000 to 4095 [4019]
Lower Limit (lower limit)
Y: 0000 to 4095 [0080]
Pb: 0000 to 4095 [0077]
Pr: 0000 to 4095 [0077]
When two BKM-243HS or BKM-244CC are installed in the OPTION 1 and 2 or OPTION 3
and 4 option slots, you can select this item.
Upper Limit (upper limit)
G: 0000 to 4095 [3935]
B: 0000 to 4095 [3935]
R: 0000 to 4095 [3935]
Lower Limit (lower limit)
G: 0000 to 4095 [0080]
B: 0000 to 4095 [0080]
R: 0000 to 4095 [0080]
Sets the error detection setting for the signal after YPbPr is converted to RGB.
Sets whether or not to detect the error of the input signal ([Off] or On).
Sets the pixel number of the gamut error in the frame to notify the gamut error detection.
When the pixel number of the error is over the set pixel number, the detection is notified.
Set to 00000 to 65535. [00000]
Sets the upper and lower lines of the signal level.
The signal level to be set is black level 256 and white level 3760 in 12bit conversion value.
Upper Limit: 0000 to 4095 [3761]
Lower Limit: 0000 to 4095 [0255]
Sets the zebra pattern displayed by the gamut error detection.
Note
When the setting for the zebra pattern is changed, Zebra Pattern of Black Detail Setting is
also set to the same setting value.
Sets the direction of the pattern.
[Diagonal Type1]: Right descending
Diagonal Type2: Left descending
Sets the amplitude of the pattern display.
Set to 1 to 50. [16]
Sets the black detail mode.
Sets whether or not to display a zebra pattern in the clipped portions with high color gradation
on the black detail mode display (Off or [On]).
Sets the zebra pattern displayed in the clipped portions.
Note
When the setting for the zebra pattern is changed, Zebra Pattern of Gamut Error Display is
also set to the same setting value.
Sets the direction of the pattern.
[Diagonal Type1]: Right descending
Diagonal Type2: Left descending
Sets the amplitude of the pattern display.
Set to 1 to 50. [16]
Captures the still picture for the standard of the color evaluation.
Loads the captured picture from the "Memory Stick".
When the item is selected, you can select the file name to be loaded.
]: factory setting)