Entering Characters - Sony bvm-l230 Operation Manual

When selecting in setting mode
1
Using the UP or DOWN button or PHASE knob, select
the desired item and press the ENTER or Ent button.
The cursor moves to the setting value and the monitor
enters in setting mode.
Display example
iInput Configuration
CH01
Format
Slot No:
Input No:
Screen Aspect
Sync Mode:
Color Temp:
Picture Preset:
Matrix/Gamma
2
Using the UP or DOWN button or PHASE knob, select
the setting value.
3
Press the ENTER or Ent button.
The setting is confirmed and the cursor returns to the
item.
When selecting from the setting list
1
Using the UP or DOWN button or PHASE knob, select
the desired item in the setting list.
Display example
iiiParallel Remote
1 Pin
CH:
---
Under Scan
Over Scan
Native Scan
16 : 9
H Delay
V Delay
External Sync
Comb
2
Press the ENTER or Ent button.
The setting is confirmed and the display returns to the
menu of the upper level.
Entering numerical values
1
Using the UP or DOWN button or PHASE knob, select
the desired item and press the ENTER or Ent button.
34
Basic Menu Operations
v
1/2
V
B
xxxxx
xxxxx
B
Cursor
xxx
xxx
xxxxx
B
Set: ENTER Cancel: MENU
v
1/4
V
01
The cursor moves to the setting value and the monitor
enters in setting mode.
Display example
iInput Configuration
CH01
H Shift Offset: xxx
Channel Name B
xx
NTSC Setup Level::
Component Level: xxxxx
xxx
Betacam Setup Level::
RGB Range: B
1080I/PsF B
Film Cadence:: xxx
Copy From B
Set: ENTER Cancel: MENU
2
Select the value in one of the following three ways:
• Enter the value directly using the numeric buttons
and press the ENTER or Ent button. (only the item
whose the value of setting range is over 0)
• Select the value using the UP or DOWN button.
• Select the value using the PHASE knob.
3
Press the ENTER or Ent button.
The setting is confirmed and the cursor returns to the
item.

Entering characters

1
Using the UP or DOWN button or PHASE knob, select
New Name or the existing name.
The "---" means that one or more characters can be
entered in sequence after the existing name.
2
Press the ENTER or Ent button.
3
Using the UP or DOWN button or PHASE knob, select
the characters that you wish to enter.
Display example
iiChannel Name
CH01
PROG___
EDIT___
CAM___
VTR___
PREV___
New Name
v
2/2
V