Transceiver And Flash Setup - Bolt VM-1000C User Manual

Transceiver and Flash Setup

Mounting the Transceiver to a Camera
1. Press the collar-lock release button, and slide the
collar to the left to unlock.
2. Insert the mounting foot into your camera's hot
shoe.
3. Slide the collar to the right until it clicks and is
locked.
Mounting the Transceiver to a Stand
Mini Stand
1. Make sure the transceiver's collar lock is in the
unlocked position.
2. Slide the transceiver into the mini-stand's cold
shoe, and slide the collar to the right until it locks.
|
14 Transceiver and Flash Setup
3
2