Installation; Safety; General Safety Instructions; Instructions, Standards And Regulations - STIEBEL ELTRON psh 50 trend Operation And Installation

inSTALLATion

Safety

inSTALLATion
7. Safety
Only a qualiied contractor should carry out installation, commis-
sioning, maintenance and repair of the appliance.
7.1

General safety instructions

We guarantee trouble-free function and operational reliability only
if original accessories and spare parts intended for the appliance
are used.
7.2

Instructions, standards and regulations

Note
Observe all applicable national and regional regulations
and instructions.
8.

Appliance description

8.1

Standard delivery

The following are delivered with the appliance:
- safety valve
The safety valve supplied must not be used in Belgium.
For use here please use standard safety valves (see also
pricelist).
8.2

Accessories

Pressure-tested taps are available as accessories.
www.stiebel-eltron.com
9.

Preparations

9.1

Installation site

The appliance is designed to be permanently wall-mounted to a
solid surface. Ensure the wall offers adequate load bearing ca-
pacity.
There should be a suitable drain near the appliance to drain off
the expansion water.
Always install the appliance vertically in a room free from the risk
of frost and near the draw-off point.
it may not be itted in a corner since the screws for ixing the
appliance to the wall must remain accessible.
9.2

Fitting the wall mounting bracket

Note
Ensure that the temperature selector is accessible from
the front.
The mounting bracket attached to the appliance has hook-in slots,
which in most cases enables installation on the bolts that are
already in place from previous appliances.
f Otherwise, transfer the dimensions for the holes to be drilled f
on the wall (see chapter "speciication / Dimensions and
connections").
f Drill the holes and secure the wall mounting bracket with f
screws and rawl plugs. select ixing materials in accordance
with the wall construction/condition.
f hook the appliance with wall mounting brackets on to the f
screws or bolts. Observe the weight of the appliance when
empty (see chapter "speciication / Data table") and, if neces-
sary, ask another person to help.
f Align the appliance horizontally. f
PSH Trend | 19