Appendix 1: Options And Accessories - Firepower FP-125 Operating Manual

AppENDIX

APPENDIX 1: OPTIONS AND ACCESSORIES

• Contact your Thermal Arc distributor to order options and accessories. For assistance in locating a Thermal Arc
distributor, contact the Thermadyne office listed in the inside rear cover that is nearest to you.
• Note the model and specification number shown on the equipment nameplate.
For Tweco/Victor Inquiries and Orders:
Call 1-800-318-6819
Replacement Torch
FEED ROLL INSTALLATION & CONSUMABLE GUIDE
.030"
0.8mm
Part No. Description
Wire Feed Roll, Knurle, .023" - .030" /.035"
1444-0427
(0.6-0.8mm/0.9mm), Hard/Cored
1444-0050 Nozzle
1444-0025 Contact Tip, .023" (0.6mm)
1444-0026 Contact Tip, .030" (0.8mm)
1444-0027 Contact Tip, .035" (0.9mm)
1444-0489 Gas Diffuser
1444-0741 MIG Gun, Complete Assembly
Appendix
Consumable parts Management Group
Catalog number 1444-0741
Wire Feed Rolls &
MIG Gun Consumables
The branding size at the
end of the feedroll refers
to the size nearest to the mark.
Figure A-1: FP-125 Feed Roll and Consumables Chart
FIREpOwER Fp-125, 135, 165
Weld Wires
Part No.
ER70S-6 Mild Steel Wire,
1444-0210
.023" (0.6mm), 2 lbs. (0.9kg) Spool
ER70S-6 Mild Steel Wire,
1444-0211
.023" (0.6mm), 11 lbs. (5kg) Spool
ER70S-6 Mild Steel Wire,
1444-0215
.030" (0.8mm), 2 lbs. (0.9kg) Spool
1444-0216 ER70S-6 Mild Steel Wire,
.030" (0.8mm), 11 lbs. (5kg) Spool
ER70S-6 Mild Steel Wire,
1444-0220
.035" (0.9mm), 2 lbs. (0.9kg) Spool
ER70S-6 Mild Steel Wire,
1444-0221
.035" (0.9mm), 11 lbs (5kg) Spool
E71T-GS Flux Cored Wire,
1444-0230
.030" (0.8mm), 2 lbs (0.9kg) Spool
E71T-GS Flux Cored Wire,
1444-0231
.030" (0.8mm), 10 lbs (4.5kg) Spool
E71T-GS Flux Cored Wire,
1444-0235
.035" (0.9mm), 2 lbs (0.9kg) Spool
E71T-GS Flux Cored Wire,
1444-0236
.035" (0.9mm), 10 lbs (4.5kg) Spool
A-1
Description
Art # A-09026
Manual 0-5123