Record And Send Videos Via E-Mail (Video Mail) - JVC gc-px100 User Manual

The "PHOTO" icon appears on the screen for about 2 seconds upon
0
detection.
Images are captured automatically when moving subjects or human
0
faces appear on the camera's screen. (The PHOTO icon appears on
the screen upon detection.)
The captured still images will be sent via e-mail to the selected
0
recipients.
10
Detection suspended
Until the next detection is made, detection is suspended for the pre-
0
set length of time.
"DETECTION INTERVAL" can be selected from 15 seconds, 1
0
minute, 3 minutes, 10 minutes, 30 minutes and 60 minutes.
"Setting the Detection Interval of this Camera (DETECT/MAIL
SETTING)" (A p. 114)
Caution :
This function is not designed for disaster or crime prevention.
0
To prevent the situation of forgetting to turn off the power, this unit will turn
0
off automatically after 10 days of continuous usage.
While on standby for notification mails, the focus is fixed. Perform the
0
camera settings first, then enable the notification mails.
Focus may not be set correctly if the notification mails start before camera
settings are made. In this case, disable the notification mails temporarily,
then enable it again.
Be careful not to cause too much sending of e-mails. Depending on the
0
internet provider that provides the e-mail service, the e-mails may be
marked as spam or the usage limited may be exceeded.
Be sure to check the terms of the internet provider in advance to find out
if there are any restrictions on the number or size of e-mails that can be
sent.
When setting another person as the recipient, be sure to obtain his/her
0
consent in advance.
If you reply to the received e-mail by using this unit, the receiver can not
0
check your replied e-mail by using this unit.
Check the e-mails sent by this unit from computer, etc.
JVC will not be responsible for any trouble that occurs upon the sending
0
of mails.
Record and Send Videos via E-mail (VIDEO
MAIL)
Videos of up to 15 seconds can be recorded and sent via e-mail.
With this function, short videos can be delivered easily even on a daily basis,
such as to show the growing up of small children to their distant
grandparents.
Memo :
Specifications of the videos sent via video mail are as follows:
0
Item
System MP4
Video - H.264/MPEG-4 AVC baseline profile codec
- 640 x 360 resolution
- 30p frame rate
- 1 Mbps bit rate
Audio - Advanced Audio Coding (AAC) system
- 48 kHz sampling rate
- 16 bit
- 2 channels
What You Need
Wireless LAN router (use a product that has a Wi-Fi certification logo)
0
Internet connection
0
Account for sending e-mails (Supports SMTP. E-mail services that is only
0
accessible from the web cannot be used.)
Settings Required in Advance
To send e-mails, the following settings are required in advance.
*The above settings are not necessary if they have already been set for other
functions.
1 Registering an access point
"Registering the Access Points of the Camera to Connect (ACCESS
POINTS)" (A p. 115)
2 Setting the account for sending e-mails
"Setting the Sender's E-mail Address of the Camera" (A p. 110)
3 Registering the recipient's e-mail address (up to 8 addresses)
"Registering the Recipient's E-mail Address of the Camera" (A p. 113)
Operation Method
1
Tap "MENU".
Set the camera to the recording mode.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
Using Wi-Fi
Details
99