JVC gc-px100 User Manual page 116

Using Wi-Fi
Operation Method
Operation on this camera
o
Memo :
Prior to use this function, a smartphone application needs to be installed
0
on the smartphone.
"Installing Smartphone Applications" (A p. 122)
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap "OUTDOOR MONITORING" (M).
(Operation on this camera)
4
Tap "START" (I).
(Operation on this camera)
5
Start making a connection.
(Operation on this camera)
Name (SSID) of the access point (wireless LAN router) in connection
0
is displayed.
6
The following is displayed when the camera is connected to the access
point.
96
The URL (WAN) for the smartphone to connect to appears.
0
(Does not appear if DDNS is not set or set incorrectly.)
"LUPnP" is displayed when UPnP cannot be used.
0
7
Check the URL (WAN).
After checking the URL, tap "QUIT" to return to the previous screen.
0
"LUPnP" is displayed when UPnP cannot be used.
0
Operation on the smartphone
o
1
Start "Wireless sync." on the smartphone after setting "OUTDOOR
MONITORING".
2
Tap "OUTDOOR MONITORING".
3
Log in with your username and password.
(if authentication cannot be achieved)