Detect/Mail - JVC gc-px100 User Manual

5
Operate from a smartphone
How to operate from a smartphone
0
"Using Smartphone Applications" (A p. 122)
Monitoring from the computer (Windows7)
o
1
On the Internet Explorer (web browser), enter the URL (WAN) that is
checked by "Operation on this camera".
2
Log in with your username and password.
The username is "jvccam" and the default password is "0000".
0
"Changing the Settings" (A p. 104)
Operations from the Web browser
0
Using Wi-Fi by Creating a QR Code

DETECT/MAIL

Setting (Once setting is done, start from the "Regular
o
Operation" below)
Create a QR code.
Memo :
Perform operations in step 2 and 3 after creating a QR code, and read the
0
QR code one by one by the camera.
Enter values in the required items for setting the recipient's
o
e-mail address.
E-mail address: set the recipient's e-mail address.
0
E-mail function: set the function of the e-mail that is transmitted to the
0
recipient's e-mail address.
Up to 8 e-mail addresses can be set.
0
Start reading from (1) if multiple e-mail addresses are set. Click the number
0
or "<", ">".
Enter values in the required items for setting the sender's
o
e-mail address.
E-mail address: set the sender's e-mail address.
0
Enter values in the required items for setting the e-mail
o
server (SMTP server).
SMTP server: set the name of the e-mail server (SMTP server) from which
0
an e-mail account is obtained.
SMTP port number: set according to the condition when the e-mail
0
account is obtained. Normally set to "25".
SMTP authentication method: set according to the condition when the e-
0
mail account is obtained.
User name: set if the SMTP authentication method is set to other than
0
"None". (same as the registered user name (account name) when the e-
mail account is obtained)
Password: set if the SMTP authentication method is set to other than
0
"None". (same as the registered password when the e-mail account is
obtained)
Enter values in the required items for setting notification
o
mails.
Detection method: set the detection method of when to start recording
0
video for notification e-mails.
Detecting interval: select the time period to enable detection again after
0
the previous one.
Self recording: specify whether to save the detected video on the camera
0
(ON) or not (OFF).
Display the screen for reading the QR code.
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
161