JVC gc-px100 User Manual page 188

Using Wi-Fi by Creating a QR Code
Other methods, such as "Manual Registration" and "WPS PIN
0
Registration" are also available. Refer to the following link for details.
"Registering the Access Points of the Camera to Connect (ACCESS
POINTS)" (A p. 115)
Regular Operation
o
Record videos to send a video mail.
1
Tap "MENU".
Set the camera to the recording mode.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
3
Tap "VIDEO MAIL" (L).
4
Tap "VIDEO MAIL ADDRESS".
5
Select "VIDEO MAIL ADDRESS", then tap J.
168
To display the L icon, tap the e-mail address.
0
To cancel the e-mail address, press the icon one more time.
0
Up to 8 e-mail addresses can be selected.
0
6
Tap "START" (I).
7
Press the START/STOP button to start recording.
Or, tap the REC on screen.
0
8
Recording starts after the 5-second countdown.
You can allow the recording to be performed for 15 seconds or press
0
the START/STOP button to stop.
9
Tap "SEND".
Sending of the video mail starts.
0
To check the file, tap "PLAY TO CHECK".
0
When it is complete, tap "OK".
0
Check the incoming e-mail.