Adjusting The Angle Of The Lcd Monitor; Attaching The External Microphone - JVC gc-px100 User Manual

Getting Started

Adjusting the Angle of the LCD Monitor

Angles of the LCD monitor can be adjusted when shooting by holding this
unit in a high or low positions.
Caution :
To move the LCD monitor, do not apply excessive force so as not to
0
damage the connected part.
When this unit is not used or during transportation, set the LCD monitor to
0
its original position.
22

Attaching the External Microphone

You can attach an external microphone (commercially available) to this unit.
Use a microphone that supports plug-in power.
0
1
Attach an external microphone (commercially available) to the shoe.
2
Open the cover of the microphone connector and connect the cable of
the external microphone.
3
Connect the cable of the external microphone to the microphone
connector.
Memo :
Recommended microphone: use MZ-V10 (sold separately).
0
Do not apply excessive force when attaching an external microphone, etc,
0
to this unit.
The microphone level can be displayed or set in the settings menu.
0
"MIC LEVEL" (A p. 173)
" MIC LEVEL SETTING " (A p. 173)