Checking The Mac Address Of This Camera - JVC gc-px100 User Manual

Using Wi-Fi
Tap "USE" to use the selected access point.
0
Tap "DELETE" to delete the registered access point.
0
7
Perform the LAN settings. (when "DHCP" is set to "OFF")
(Operation on this camera)
After setting, tap "OK".
0
LAN settings comprise of the following items.
0
DHCP ON: Obtains IP address from the DHCP server
automatically.
OFF: Settings of "IP ADDRESS", "SUBNET
MASK", "DEFAULT GATEWAY", "PRIMARY
DNS", and "SECONDARY DNS" are required.
IP ADDRESS Enter the IP address.
SUBNET MASK Enter the subnet mask.
DEFAULT Enter the default gateway.
GATEWAY
PRIMARY DNS / Enter the IP addresses of the primary and
SECONDARY DNS secondary DNS servers.
120

Checking the MAC Address of this Camera

Displays the MAC address of the camera.
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
4
Tap "MAC ADDRESS".
(Operation on this camera)
The MAC address of the camera appears.
0
(The above shows the address during direct connection, while the
below shows the MAC address when connected to an access point.)
After checking, tap "OK".
0