JVC gc-px100 User Manual page 180

Using Wi-Fi by Creating a QR Code
5
Start making a connection.
(Operation on this camera)
Name (SSID) of the access point (wireless LAN router) in connection
0
is displayed.
6
The following is displayed when the camera is connected to the access
point.
The URL (WAN) for the smartphone to connect to appears.
0
(Does not appear if DDNS is not set or set incorrectly.)
"LUPnP" is displayed when UPnP cannot be used.
0
7
Check the URL (WAN).
After checking the URL, tap "QUIT" to return to the previous screen.
0
"LUPnP" is displayed when UPnP cannot be used.
0
Operation on the smartphone
o
Memo :
Prior to use this function, a smartphone application needs to be installed
0
on the smartphone.
"Installing Smartphone Applications" (A p. 122)
1
Start "Wireless sync." on the smartphone after setting OUTDOOR
MONITORING.
Tap "START" in OUTDOOR MONITORING on the camera to start.
0
160
2
Tap "OUTDOOR MONITORING".
3
Log in with your username and password.
(if authentication cannot be achieved)
The username is "jvccam" and the default password is "0000".
0
"Changing the Settings" (A p. 104)
4
The recording screen is displayed.