JVC gc-px100 User Manual page 131

Tap "CHANGE" to change the contents that are already set.
0
Enter the e-mail address and tap "SET".
0
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
After setting, tap "SET".
0
7
Tap "NEXT".
(In case of Gmail, tap "SKIP")
(Operation on this camera)
Tap "CHANGE" to change the contents that are already set.
0
Enter the SMTP server and tap "SET".
0
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
After setting, tap "SET".
0
8
Tap "CHANGE" to change the SMTP port.
(In case of Gmail, tap "SKIP")
(Operation on this camera)
Change the SMTP port number (if necessary) and tap "SET".
0
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap E or F to move one space to the left or right.
0
After setting, tap "SET".
0
9
Tap "CHANGE" to change the authentication.
(In case of Gmail, tap "SKIP")
(Operation on this camera)
Tap the desired "AUTHENTICATE METHOD".
0
10
Tap "NEXT".
(In case of Gmail, tap "SKIP")
(Operation on this camera)
The following does not appear if "AUTHENTICATE METHOD" is set
0
to "NONE".
Tap "CHANGE" to change the contents that are already set.
0
Enter the username and tap "SET".
0
Using Wi-Fi
111