JVC gc-px100 User Manual page 50

Recording
Operation Buttons for Still Image Recording
Operation
Buttons
Video/Still Image
A
Mode
A/B
MENU
B
Display Button n
C
30
Description
Switches between video and still image
modes.
Displays the various menus of still image
recording.
"Operating the Menu" (A p. 169)
Switches the display between full (m) and
simple (n) with every tap of the button.
Simple display: Some displays
0
disappear after approximately 3
seconds.
Full display: Displays everything. The
0
display button changes from n to m.
When the power is turned off, full display
0
(m) will be set.
Useful Settings for Recording
When "QUICK RESTART" is set to "ON", shooting can be started
0
immediately after pressing the power button if the power is turned off within
5 minutes.
" QUICK RESTART " (A p. 184)
When "AUTO POWER OFF" is set to "ON", this unit turns itself off
0
automatically to conserve power when it is not operated for 5 minutes.
" AUTO POWER OFF " (A p. 184)
When "TOUCH PRIORITY AE/AF" is set to "FACE TRACKING", this unit
0
detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.
"Capturing Subjects by Tracking Automatically (TOUCH PRIORITY AE/AF)"
(A p. 34)
Caution :
Do not expose the lens to direct sunlight.
0
Do not use this unit in the rain, snow, or places with high humidity like the
0
bathroom.
Do not use this unit in places subject to excessive humidity or dust, as well
0
as places exposed to steam or smoke directly.
The power may turn off to protect the circuit if the temperature of this unit
0
rises too much.
Do not remove the battery pack, AC adapter, or SD card when the access
0
lamp is lighted. The recorded data may become unreadable.
This unit is a microcomputer-controlled device. Electrostatic discharge,
0
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, turn off the power, then remove
the AC adapter and battery pack. This unit will be reset.
Memo :
Before recording an important scene, it is recommended to conduct a trial
0
recording.
Depending on the shooting conditions, the four corners of the screen may
0
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.