Boot Device Priority - Fujitsu DESKPOWER 6000 User Manual

Boot Device Priority

This item sets the priority of devices to load the OS using a submenu. Move the cursor to
this item and press the Enter key to display a submenu as shown below.
Main Advanced
Boot Device Priority
1. [Floppy Disk
2. [Hard Disk Drive]
3. [ATAPI CD-ROM Drive]
F1 Help Select Item
ESCExit Select Menu
The priority is the order of each item. (The lowest number indicates the highest priority.)
Select the device whose priority is to be changed using the or
moves up to a higher priority when the space is pressed and moves down to a lower
priority when the - key is pressed.
Point
For booting from a CD-ROM, a CD-ROM containing an OS capable of being booted is
required.
Before turning on or booting the power, set the CD-ROM on the CD-ROM drive.
62
PhoenixBIOS Setup Utility
Security Power
Drive]
-/Space Change Value
Select :Sub-Menu F10Save and Exit
Enter
Boot Info Exit
Item Specific Help
Use < > or < > to
select a device, then
press <+> or <Space>
to move it up the
list, or <-> to move
it down the list.
Press <Esc> to exit
this menu.
F9 Setup Defaults
key. The selected item