Addition Of Lan Adapter; Wake Up On Lan; Precautions On Using Display; Adjustment Of Analog Display Screen Position - Fujitsu DESKPOWER 5000 Series User Manual

Hide thumbs Also See for DESKPOWER 5000 Series:

Table of Contents

I Addition of LAN adapter

When this PC is operated as a client and a LAN adapter is added, the adapter cannot be used

simultaneously with the standard LAN function.

To use several LAN adapters at the same time, a server OS such as Windows NT 4.0 Server and

Windows 2000 Server is required.

I Wake up On LAN

By selecting [Power-saving settings]-[Auto Wake up] and setting [Wake up On LAN] to [Enable],

the PC can be turned on via LAN (WOL: Wake up On LAN).

I Precautions on using display

Under the following conditions, the screen may be distorted or display horizontal lines. This should

not be considered faulty.

G When Windows is started or closed.

G When the PC is entering the standby mode or returning to the original state.

G When the resolution, number of colors, or refresh rate of the screen changed.

G When the screen is changed (ex. to the full screen or to the original state).

G When the PC is entering the pause mode or returning to the original state.

I Adjustment of analog display screen position

For an analog display, the BIOS Setup or MS-DOS screen may be displayed in a wrong position

on the 640 x 480 (60Hz) Windows screen after the position is adjusted using the display. In this

case, adjust the position on each screen.

I Display of video memory capacity

Although the video memory capacity is not displayed correctly in [Display Properties], it should

not be considered faulty.

I Power-saving function of display (Windows 95 model)

When the power-saving function of the display is set to "Shut off monitor" or "Low-Power Standby",

the suspend function is not available.

I Power saving of display

For Windows 95 model

If a display used does not support the power-saving function, open [Advanced Properties] in the

[Display Properties] dialog box and uncheck [Monitor is Energy Star compliant] in the [Monitor]

tab.

For Windows 98 model

When a display used does not support the power-saving function, set both [System standby] and

[Shut off monitor] in the [Power control properties] dialog box to [Disable].

Table of Contents