AMX MVP-5100 Operation/Reference Manual page 77



The following fields are required: SSID and Password/Pass Phrase.



WPA-PSK Settings
SSID:
Password:
Cancel/Save:


MVP-5100/5150 5.2" Modero Viewpoint Touch Panels
WPA is normally displayed as TKIP.
WPA2 is normally displayed as AES CCMP.
Enter the SSID of the AP.
Enter a pass phrase with a minimum of 8 characters and a maximum of 63.
The exact same pass phrase (including capitalization) must be entered in the access point.
Opens an on-screen keyboard to enter the SSID name used on the target AP.
The SSID is a unique name used by the AP, and is assigned to all panels on
that network. An SSID is required by the AP before the panel is permitted to
join the network.
• The SSID is case sensitive and must not exceed 32 characters.
• Make sure this setting is the same for all points in your wireless network.
• If this field is left blank, the panel will attempt to connect to the first available
AP.
Opens an on-screen keyboard to enter a passphrase (password).
• This alpha-numeric string must use a minimum of 8 characters and a
maximum of 63.
• The exact pass phrase string (including capitalization) must be entered on
the target AP.
• Cancel - discard changes and return to the previous page.
• Save - store the new security information, apply changes, and return to the
previous page.
Refer to the Configuring Wireless Network Access (MVP-5150 Only) section on page 26 for
details on these security options.
Refer to the Using the Site Survey Tool section on page 28 for more information on using this
tool.
Protected Setup Pages
65