AMX MVP-5100 Operation/Reference Manual page 64

Setup Pages
Power Management Page (Cont.)
Shutdown:
Disable on External Power: This button disables Sleep Mode when power is applied to the device.
Auto Dim:
Battery Charge Status:
Battery Level Port:
Battery Level:
Battery Type:
Battery Power Brightness
Limit:
52
This value determines the number of hours or minutes that need to pass before
the panel automatically shuts down. Once shut down, the device will have to be
restarted. The Up/Down buttons alter the timeout value (in minutes). Use the
Up/Down arrows to change the settings. A value of Off disables this feature.
Note: Shutdown mode turns the unit completely off, including communication
circuits, and preserves battery life, unlike Sleep mode, which only turn off the
display. From Shutdown mode, a unit may be turned on by touching the screen.
Range = 3, 5, 10, 15, 30 minutes; 1, 2, 3, 4 hours Default = Off.
When enabled, Auto Dim will engage at half the time set under the Sleep
setting or after five minutes, whichever is sooner.
The Battery Charge Status field indicates the power charge currently available
on the battery.
The Battery Level Port field indicates the port being used to report charge
status levels back to the NetLinx Master (set in TPDesign4).
The Battery Level field indicates the level being used to report status levels
back to the NetLinx Master (set in TPDesign4).
The Battery Type field indicates the type of battery installed in the device. The
battery type may be XPX5000B , 2 , or 3 .
The DISABLE/DISABLED button acts as a power save feature with two options:
• Disable - Clicking on this button deactivates this power save feature. The
panel will use the Panel Brightness level.
• Disabled - Clicking on this button activates the brightness limit set on the
panel, conserving battery power. Activating this feature causes the panel to
function at 80% of full brightness and overrides the Panel Brightness value
set on the Setup page.
MVP-5100/5150 5.2" Modero Viewpoint Touch Panels