Security Settings (Mvp-5150 Only) - AMX MVP-5100 Operation/Reference Manual

Protected Setup Pages

Security Settings (MVP-5150 only)

The Security button on the Protected Setup page of the MVP-5150 has three settings: Standard, Secure, and
DoD. Pressing the button opens the Panel Security Setting popup window (FIG. 47)
FIG. 47 Panel Security Setting popup window
Each of the settings has different features for touch panel security:
Security Profile Features
Standard:
Secure:
DoD:
A transition from one security mode to another will reset the Protected/Web Control/
remote login password to the default value for the current security mode (please refer
to the default passwords above). A transition to Secure or DoD mode will disable G4
Web Control. Although the security password features are immediate, a reboot must
occur for all the new security mode features to fully take effect.
For more information on configuring AMX devices for a secure environment, please refer to the guide Security
Profiles: Configuring AMX Devices For Installation Into a Secure Environment, available at www.amx.com.
56
• Factory default, shipped in this configuration.
• Default Protected Setup Password is " 1988 ".
• Remote login uses Telnet.
• Default Protected Setup Password is "Amx1234!".
• Minimum password requirement is 8 characters with at least one numeric character.
• Remote login uses SSH.
• Remote login user name is " amx ".
• Login failure attempt pauses 4 seconds before another login attempt is allowed.
• After 3 consecutive unsuccessful SSH login attempts, login lockout is enabled for 15
minutes.
• Login and logout audit logging is enabled.
• Default Protected Setup Password is " Amx1234! ".
• Minimum password requirement is 8 characters with at least one numeric character,
one uppercase character, one lower case character, and one special character, with
no duplicate adjacent characters.
• Remote login uses SSH.
• Remote login user name is " amx ".
• Login failure attempt pauses 4 seconds before another login attempt is allowed.
• After 3 consecutive unsuccessful SSH login attempts, login lockout is enabled for 15
minutes.
• Login and logout audit logging is enabled.
• DoD login banner is enabled.
MVP-5100/5150 5.2" Modero Viewpoint Touch Panels