Installation Instructions; Product Specification - Danfoss TP9000 Installation And User Instructions Manual

Installation Instructions

Please note: This product should only be installed by a qualifi ed
electrician or competent Heating installer, and should be in
accordance with the current edition of the IEEE wiring regulations.
Product specifi cation
Specifi cation
Power supply
Switching action
Unit switch rating
Memory Backup
Heat Temperature Range
Setting
Factory Set Calendar Clock
Remote Sensor Inputs
('A' models only)
Programme resolution
Timing Accuracy
Dimensions, mm (W, H, D)
Design standard
Control Pollution Situation
Rated Impulse Voltage
Ball Pressure Test
DANFOSS HEATING
230V model
230 Vac, ±15%,
50/60 Hz
2 x SPDT internally linked, Type 1BS
230 Vac, 3(1)A
Retained for life of product
5°C - 30°C
Automatic Summer/Winter time
change
Can be set by installer for remote
sensor, limited sensor, window con-
tact, tele-switch or outdoor sensor
± 1 minute
± 1 minute
135 x 88 x 32
EN 60730-2-7 +EN60730-2-9
Degree 2
2.5 kV
75°C
24V model
24 Vac, ±15%,
50/60 Hz
24Vac, 3(1)A
GB
PL
3