Hot Water; Customising The Display; Setting The Correct Date And Time - Danfoss TP9000 Installation And User Instructions Manual

Hot Water

Weekdays (Mon-Fri)
Event
1
2
3
4
5
6
Note: these are also times for
Block "A" programmes
Note: If set up for two on/off events per day, events 3 and 4 are skipped.
If set up for one on/off event per day, events 2, 3, 4 & 5 are skipped. In
both cases the events are re-numbered.

Customising the display

For the sake of clarity, the instructions assume that the display setting
uses a 24 hour clock, °C and that days of the week are shown as text.
All of these settings can be personalised after the thermostat has been
programmed, see page 27

Setting the correct date and time

Your TP9000 incorporates a real time clock with calendar function that
automatically changes time in both Spring and Autumn. The time and
date is set in the factory for the UK time zone, and does not normally
require adjustment. If you live in another time zone refer to "Time zone
off set" on page 34. However, should it be found necessary to adjust
time or date for any other reason refer to the following instructions.
18
Time Temp. °C
06:30 On
08:30 Off
11:30 On
13:30 Off
16:30 On
22:30 Off
Weekend (Sat-Sun)
Event Time
1 07:30
2 09:30
3 11:30
4 13:30
5 16:30
6 22:30
Note: these are also times for
Block "B" programmes
Temp. °C
On
Off
On
Off
On
Off
TP9000