Altering The Display To Show Time Or Temperature (Heating Mode); Temporarily Alter Current Programmed Temperature; To Change Day Of Week Legends From Numbers To Text; To Change Time Display Between 12 Hour And 24 Hour Clock - Danfoss TP9000 Installation And User Instructions Manual

User Overrides

GB
PL
Altering the display to show time or temperature
(Heating Mode)
Press + and - together to
change between settings.

Temporarily alter current programmed temperature

Press Λ or V until required temperature is displayed. Please note that
your installer may have restricted both upper and lower temperature
settings and the temperature override limits.
This override will automatically be cancelled at the beginning of the
next programmed event. Please note that your installer may have
restricted the duration of the override to something other than next
event. In this case the override arrow will fl ash to indicate a timed
override is active during the next event

To change day of week legends from numbers to text

Press Λ and - together to toggle between day numbers and text.
To change time display between 12 hour and 24
hour clock
Press Λ and + together to toggle between 12 and 24 hour clock.
DANFOSS HEATING 27