Set Upper Limit Of Temperature Range; Set Lower Limit Of Temperature Range; Enable Off At Lower Limit; Enable On At Upper Limit - Danfoss TP9000 Installation And User Instructions Manual

c) Use + and - keys to scroll backwards and forwards between options
V Λ
then and
on the right hand of the display indicates the number of the selected
option. The large characters display the option value selected.
d) To return to RUN, press and hold PROG until the display returns to
RUN mde.
Option 30 - Set upper limit of temperature range
This allows the upper limit of the thermostat setting
range to be electronically limited. Press + until
Option 30 is displayed, use V and Λ to select required
setting.
Setting
Option 31 - Set lower limit of temperature range
This allows the lower limit of the thermostat setting
range to be electronically limited. Press + until
Option 31 is displayed, use V and Λ to select required
setting.
Setting 5 - 40°C (factory setting is 5°C)
Option 32 - Enable Off at lower limit
This enables an OFF function to be selected if a set
point below the lower limit is selected. Press + until
Option 32 is displayed, use
setting.
Setting 0 Disabled
Setting 1 Enabled (factory setting)
Option 33 - Enable On at upper limit
This enables an ON function to be selected if a set
point above the upper limit is selected. Press + until
Option 33 is displayed, use
setting.
Setting 0 Disabled (factory setting)
Setting 1 Enabled
DANFOSS HEATING
keys to change the option settings. The fl ashing digit
40 - 5°C (factory setting is 30°C)
V Λ
and
V Λ
and
to select required
to select required
GB
PL
9