Table of Contents
Advertisement
3.
Safety - Boiling Models
A safety lock feature is provided to pre-
vent boiling water flowing if any of the
hot levers are inadvertently operated.
To dispense boiling water
(With the Safety ON)
Depress the Red lever, while
simultaneously covering the safety lock
button with a second finger. These two
actions need to occur within 2 seconds
for the successful dispensing of boiling
water.
The Safety Lock button can only be
Disabled or Enabled from the LCD
touch screen (Located on the unit in the
cupboard).
NOTE:
When Disabled, no water will be dispensed from the Boiling Hydrotap.
Boiling Water Lever:
(With the safety OFF)
Depressing the "Red" lever allows the
dispensing of boiling water.
Pulling forward the Red lever allows the
tap to operate in a "no-touch" mode.
Water will flow from between 5 and 15
seconds, this is user adjustable (see
page 17).
To reset, return the lever to the "Off"
position and repeat the step. The lever
has to be manually returned to the "Off"
position.
Boiling Models
To set the safety using the touch screen:
1.
Press the [MENU] button for
main menu.
2.
Press the [Setting] button.
3.
Press the [Safety] button.
4. Press button
B
to Enable /
Disable, the safety lock feature.
Page 2 of 20
Tap operation
Press or pull lever
801621 - B, BA, BHA, BAHA, - HydroTap User Guide - August 2014 - V1.09
Safety Lock
B
Advertisement
Table of Contents
