Call Forwarding - Personal; Call Forwarding -All; Pulse/Tone Switching - Comdial ExecuTech System 2000 User Manual

Call Forwarding (continued) . . .
CALL FORWARD - ALL
To forward all calls to another telephone,
.
Press @ .
l
Dial a @.
I
l
Dial extension number of station to which calls are
to be forwarded.
Display:
XXXX = Station name or number.
To cancel all-call forwarding
.
Press @.
l
Dial a @ .
NOTE: For each intercom call received during call forward, a
ring reminder (short tone burst) will be heard at the
called station to remind the user that calls are being for-
warded.
Pulse/Tone Switching. . .
If the local telephone service is pulse (rotary) but tone generation
is required during the call, convert to tone while dialing:
.
Press m at point in dialing sequence where
conversion to tone is required. (System will switch
back to pulse dialing when call is ended.)
NOTE: Pulseflone switching can be programmed into softkeys
by pressing m during autodial or speed dial num-
ber storage.
38