Saved Number Redial; Dtmf - Comdial ExecuTech System 2000 User Manual

Saved Number Redial. . .
The first 16 digits of the last manually dialed number can be saved
for later redial.
To save the number,
l
Press softkey pre-programmed for this purpose.
To dial a saved number,
l
Lift handset. Listen for dial tone.
l
Press HOLD then press pre-programmed softkey.
0
Extended Dual Tone Multiple Frequency
(DTMF)
The length of the DTMF tone can be extended from the standard
length to a pre-programmed longer length for accessing answering
machines, banking computers, etc. that require DTMF tones longer
than 80 msec. in length.
To extend tone length,
l
Take station off-hook (lift handset or press
0
SPKR ).
l
Press line key if line is not automatically selected.
l
Wait 10 seconds, and dial number. System will
generate long DTMF dial tones.
ma
l
Immediately press HOLD
0
then press line key to
set system to generate long DTMF dial tones.
To alternate between long tone and standard tone length during
a call,
l
Press HOLD then press line key.
0
12