Automatic Redialing; Last Number Redial - Comdial ExecuTech System 2000 User Manual

Automatic Redialing . . .
To actlvate automatic redial,
l
Press softkey pre-programmed for that purpose
:'
l
Number will be dialed once a minute for ten
minutes.
If call is answered,
l
Take control by lifting handset.
If called station is busy,
l
Press auto redial softkey to begin redial cycle im-
II
mediately. (Auto redial LED lights.)
To cancel automatic redial,
l
Press auto redial key, lift and replace handset, or
press any station key. (Auto Redial light goes out.)
NOTE: Any user originated station activity during automatic
redial will cancel the feature.
Last Number Redial . . .
The last number previously dialed can be automatically redialed
with a one or two-key action.
l
Press a.
( If on line listening to dial tone,
press
0
HOLD then press El
4
l
Listen for ringing or busy tone.
l
Ringing tone: When party answers, pick up handset.
l Busy tone: Press @ to disconnect.
Display shows last line used and number dialed.
Continued on next page . . .
11