Comdial ExecuTech System 2000 User Manual page 55

Call announce with handsfree answerback:
An internal speaker at
each telephone provides call-announce capability over the intercom
link.
Call forward:
User can designate another telephone to receive intercom
calls normally directed to the user's telephone.
Call messaging:
This feature allows a station user to light a personal
message lamp at an unattended station or transfer to a message
center using the call messaging
access
code.
Call pickup:
A call can be answered at one telephone when it is ringing
at another telephone.
Call transfer:
Outside calls can be transferred from one station to
another.
Central message desk:
Any station can be assigned control of mes-
sage waiting lights and deliver messages to and from all other stations
in the system.
Calling station identification: If
a calling station is programmed into the
busy lamp field (BLF) of a called station, the BLF light will flash to
identify the calling station at the called station.
Common audible interface:
A system can be arranged to provide
external signalling whenever an incoming line rings.
q D
Delayed and direct ringing:
Ringing assignments are programmed to
be either immediate or delayed for certain lines at certain stations.
Direct Station Selection/Busy Lamp Field (DSWBLF):
One-key inter-
com calling with visual indication of telephone status.
Do not disturb:
Incoming call ringing and intercom calling are disabled.
Dynamic line key:
System temporarily assigns a normally unassigned
line to an idle line key for certain call handling operations.
Exclusive hold:
Only the telephone placing call on hold can retrieve it.
Flash/Recall:
A station key can provide either access to host system
calling features or dial tone recall depending upon system require-
ments.
52