Comdial ExecuTech System 2000 User Manual page 29

Station Speed Dial Programming e . .
Station speed dial numbers stored by a station user will be ac-
cessed by that station user, ONLY. The storage locations are
keypad digits 0 through 9 on the station. Before attempting to
program, decide on the following items: (1) The number or feature
to be stored, (2) which storage location will be used (0 - 9) (3) the
line that the call will go over (individual line or intercom).
To program numbers,
l
Press @ (w, a @ .
Display:
l
Dial a memory location (0 through 9).
Display:
l
Select line, or keypad 1 - 4 for trunk groups.
Options are:
Specific line key
Keypad 1 for Trunk Group 1
Keypad 2 for Trunk Group 2
Keypad 3 for Trunk Group 3
Keypad 4 for Trunk Group 4
Keypad 0 for prime line or last line used
ITCM for feature access
Continued on next page . . .
26