Downloading Options Pws Sect 7 - DSC PC1555 CP-01 Installation Manual

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

[390]-[393] LINKS Preambles

Downloading can be performed through the LINKS1000

cellular communicator if the telephone line is discon-

nected. If using the LINKS1000 with Call Back, you need

to program the LINKS1000 Preamble with the download-

ing telephone number in order for the panel to call the

computer correctly.

LINKS1000 Cellular Communicator

The LINKS1000 cellular communicator can be used three

different ways: as the sole communicator for the panel, as

a backup for either or both telephone numbers, or as a

redundant backup to the land line communicator (the

panel will call both the land line and via the LINKS1000).

A LINKS1000 Preamble

LINKS1000 Preamble

LINKS1000 Preamble is programmable for each tele-

phone number in the event that the land line number is

local but the LINKS1000 is required to dial an exchange.

When programming a LINKS1000 Preamble, all unused

digits must be programmed with a Hex decimal 'F'.

Sole Communicator

The panel can be programmed to report only using the

LINKS1000 cellular communicator when an event occurs.

To program this select only the LINKS1000 for the Com-

municator Call Direction

municator Call Direction Options for the event. In addi-

municator Call Direction

tion the Call LINKS1000 as well as Land Line

Call LINKS1000 as well as Land Line option must

Call LINKS1000 as well as Land Line

also be enabled. When the selected event occurs the panel

will only attempt to call the central station using the

LINKS1000.

NOTE:

If a LINKS1000-only event fails to communicate, the

LINKS1000 must successfully communicate a LINKS1000-only

event in order for the FTC Trouble to clear.

Backup Communicator

The panel can be programmed to call using the

LINKS1000 cellular communicator if the panel is having

difficulty communicating an event using the land line. To

program

this

select

the

LINKS1000 options for the Communicator Call Direction

Options for the event. The LINKS1000 is backup of Land

Lines option must also be selected.

When used as a backup communicator the panel will

attempt to call the central station in the following manner:

• the panel will try to call using land lines - if unsuc-

cessful the panel will try to call using the LINKS1000

• if unsuccessful the panel will try to call using the land

lines

• if unsuccessful the panel will try to call using the

LINKS1000

This process will continue until the panel has successfully

communicated with the central station or the Maximum

Dialing Attempts has been reached.

Dialing Attempts

Redundant Communicator

The panel can be programmed to call using the land line

and the LINKS1000 cellular communicator when an event

occurs. To program this select both the telephone number

and the LINKS1000 options for the Communicator Call

Direction Options for the event. In addition the Call

Direction

LINKS1000 as well as Land Line

LINKS1000 as well as Land Line option must be selected.

LINKS1000 as well as Land Line

The panel will call the LINKS1000 and then call the land

line when reporting the selected event.

LINKS1000 Special Preamble*

In some areas of North America, dialing #DAT or *DATA

reduces the cellular billing increment. The LINKS1000 Spe-

cial Preamble

cial Preamble (section [393]), allows the use of [*] and [#]

cial Preamble

characters for the programming of #DAT and *DATA. The

LINKS1000 Special Preamble is sent BEFORE the Preamble

programmed in Sections [390] to [392]. Example: [Special

Preamble][Regular Preamble][Telephone Number].

Com-

telephone

number

and

Maximum

Communicator Call

Call

LINKS1000 Spe-

NOTE:

If this Special Preamble is programmed, it will be

inserted before the Regular Preamble of ALL telephone num-

bers. Hex digits D and E are not supported for Preamble pro-

gramming. If Busy Tone Detection is enabled, the LINKS1000

must be tested to ensure full operation.

Refer to the LINKS1000 Installation Manual for more

information and connection diagrams.

* Do not use this section for Central and Remote Fire Appli-

cations.

(Downloading Telephone Number) . . . . . . . . . . . . . . . Section [490]

Communicator Call Direction Options . . . . . Section [351] to [376]

Call LINKS1000 as well as Land Line. . . . . Section [380], Option [7]

Maximum Dialing Attempts . . . . . . . . . . . . . . . . . . . . Section [165]

This 4-digit number can be used with long distance tele-

phone numbers that are dialed through the LINKS mod-

ule. These codes are used for programming area codes in

cases where a land line telephone number may be a local

call, while the cellular telephone number dialed by the

LINKS module is a long distance call.

[393] - LINKS Special Function Preamble

This Special Preamble is inserted before all other pream-

bles. It is used for dialing such cellular numbers as #DAT

and *DATA for reduced billing increments.

5.7 Downloading Options PWS Sect 7

Downloading

Downloading allows programming of the entire control

panel via a computer, modem and telephone line. All

functions and features, changes and status, such as Trou-

ble conditions and open zones can be viewed or pro-

grammed by downloading.

NOTE:

When power is applied to the panel, a 6-hour down-

loading window can be enabled. This will allow you to per-

form downloading without having to do any keypad

programming.

NOTE:

When an event occurs that the system is pro-

grammed to communicate to the central station, the panel

will disconnect from the downloading computer and report

the event. This will happen for all events except test trans-

missions.

If the Answering Machine/Double Call

Answering Machine/Double Call option is enabled

Answering Machine/Double Call

(or during the first 6 hours after power up) the panel will

answer incoming calls for downloading provided the fol-

lowing conditions occur:

1. The panel hears one or two rings, then misses a ring.

2. At this point the panel will start a timer.

3. If the panel hears another ring before the Answering

Machine Double Call Timer expires it will answer on

Machine Double Call Timer

the first ring of the second call.

The panel will immediately go on-line and begin the

download process unless the Call Back

If enabled, the panel and computer will both hang up.

The panel will then call the Download Computer Tele-

phone Number

phone Number and wait for the computer to answer.

Once the computer answers downloading will begin.

If the User-enabled DLS Window

User-enabled DLS Window option is ON, the user

User-enabled DLS Window

can activate the downloading feature by entering

[*][6][Master Code][5].

Six hours after power-up, the panel will not answer

incoming calls unless the Answering Machine/Double

Call

Call option is enabled, or the Number of Rings

Call

grammed to be more than [0].

If the User-Initiated Call-Up

User-Initiated Call-Up option is enabled, the user

User-Initiated Call-Up

can have the panel initiate a call to the downloading com-

puter by pressing [*][6][Master Code][6].

Answering

Call Back option is enabled.

Call Back

Download Computer Tele-

Answering Machine/Double

Number of Rings is pro-

Number of Rings

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Downloading Options Pws Sect 7 - DSC PC1555 CP-01 Installation Manual

5.7 Downloading Options PWS Sect 7

Hide quick links:

Related Manuals for DSC PC1555 CP-01

Related Content for DSC PC1555 CP-01

Table of Contents