DSC Power PC1616 Quick Manual

Power series

Hide thumbs Also See for Power PC1616:

Download this manual See also: Reference Manual, User Manual

Quick Guide:

For a detailed review of the entire system, please view the

This manual includes instruction variations for LED and LCD keypads. Any instructional differences are

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY]



button OR enter your [security code] + [*] + [0] to Quick Arm.

To arm all sensors in STAY mode when you are not leaving the premises, press and hold the [STAY]



button OR enter your [security code] and do not leave the premises.

To arm all in NIGHT mode, where both the interior and exterior are armed, press [*] + [1] after first



arming in STAY mode.

Disarm:

To disarm, enter your [security code] .



DSC Power Series PC1616

indicated by the use of 'OR'.

DSC Power Series system manual.

Page 1 DSC Power Series PC1616 For a detailed review of the entire system, please view the DSC Power Series system manual. This manual includes instruction variations for LED and LCD keypads. Any instructional differences are indicated by the use of ‘OR’.
Page 2 Battery The DSC Power Series 1616 operates on a UB 1270 battery.  Loss of AC power and use of backup battery power is indicated by NO AC.  A low battery condition is indicated by BAT.  For instructions on replacing your battery, please visit our Battery Replacement Page.
Page 3 To turn the door chime function off, press and hold the [Chime] key for two seconds OR press [*] +  [4]. To turn the door chime function on, press and hold the [Chime] key for two seconds OR press ...
Page 4 Reset daily at midnight. For a complete list of user codes and attributes please see the DSC Power Series system manual. Trouble Conditions When a trouble condition is detected, the Trouble or System indicator will turn on and the keypad will beep every 10 seconds.