About Your Programmable Buttons; Memory Buttons; Program Memory Buttons - Nortel 1140E User Manual

24 Chapter 4 Telephone setup
To change the time that appears on your telephone display to
local time:
1
Press Feature *510.
2 Press Change.
3 Press * to switch between adding or subtracting time.
4
Using the dialpad, enter the number of hours between local time and system time.
Note: Press # to enter half-hour increments.
5 Press OK.
Note: It may take up to 1 minute for the change to appear on the display.

About your programmable buttons

Your System Administrator assigns the four programmable buttons as line, intercom, or memory
buttons. The label for each button appears on the display next to the button. For more information,
see your System Administrator.

Memory buttons

These are buttons that are not assigned as line or intercom buttons. Memory buttons store internal
and external phone numbers or features to give you one-touch dialing or feature activation.

Program memory buttons

You can program a memory button with a new phone number or feature.
External autodial
1 Press Feature *1.
2 Press a memory button.
3
Dial the external phone number.
4 Press OK to store the phone number.
NN40050-105 NN40050-105