Connection Between The Camera Head And Ccu; Connecting The Camera Cable To The Camera Head; Connecting The Camera Cable To The Camera Connector On The Ccu; Connecting An Extension Cable - Sony MCC-500MD Instructions For Use Manual

Connection between the
Camera Head and CCU
Use a camera cable (not supplied) to connect the
camera head to the CAMERA connector on the
CCU.
You can use one of the following four types of
camera cable.
CCMC-SA06 (standard 6 m (19.6 ft.))
CCMC-SA10 (standard 10 m (32.8 ft.))
CCMC-SA15 (standard 15 m (49.2 ft.))
CCMC-EA05 (extension 5 m (16.4 ft.))
Notes on using camera cables
• When disconnecting or connecting the camera
cable, be sure to turn off the power supply for
the CCU and all equipment connected to the
CCU. Doing so while the power is on may result
in malfunctions to the equipment.
• Make sure that the camera head and CCU are
connected via the camera cable before starting
the unit.
• Insert the connector by pushing it straight in,
taking care not to bend the pins.
• Make sure connectors are securely inserted. A
loose connection may result in noise. When
removing a connector, be sure to hold it by the
connector itself and not the cable.
Connecting the camera cable to
the camera head
Positioning marks
1
Align the positioning marks on the
camera cable connector and the round
camera cable plug, and then push the
plug in.
20

Connection between the Camera Head and CCU

Connector ring
2
Turn cable connector ring to tighten the
connection.
Note
Do not connect this unit to camera heads and
CCUs of different models.
Connecting the camera cable to
the CAMERA connector on the
CCU
Positioning marks
1
Align the positioning marks on the
CAMERA connector and the the round
camera cable plug, and then push the
plug in.
2
Turn cable connector ring to tighten the
connection.

Connecting an extension cable

When using the CCMC-EA05 extension cable
(not supplied), connect it as shown below.
Connector ring
CCMC-EA05
Extension cable
Positioning marks
Connector ring
Camera cable