Sony MCC-500MD Instructions For Use Manual page 33

Registering a picture profile
Register the current setting values as a picture
profile.
1
Press the MENU button.
The menu screen will appear.
2
In the [Picture] menu, select [Profile]
and press the SET button.
3
Select [Save], and press the SET button.
4
Select the number you want to register
the profile as and press the SET button.
A confirmation message will appear.
5
Select [OK], and press the SET button.
The number you selected will be registered
as a picture profile.
6
Once settings are complete, press the
MENU button to close the menu
screen.
Tip
You can save the current setting values to the
currently selected picture profile by pressing the
PROFILE button while holding down the SET
button.
A confirmation message will appear after the
settings are successfully saved.
Selecting a picture profile
To select a picture profile with PROFILE button
Press the PROFILE button and select the picture
profile you want to activate.
Each time this button is pressed, the indicator will
switch between 1, 2, 3, 4, 5, 6 and back to 1 in
sequential order, activating the respective picture
profile.
PROFILE button
Each time the profile is changed, the unit will
adjust the image quality according to the selected
profile.
To load a picture profile from the [Picture] menu
1
Display the menu screen, and in the
[Picture] menu, select [Profile] and then
press the SET button.
2
Select [Load], and press the SET
button.
Picture Profile 33