Table of Contents
Advertisement
Output Format Settings
The output format for this unit can be set to NTSC
or PAL. Set the output format according to where
the unit will be used. The factory default setting is
NTSC.
You can adjust unit settings by connecting it to a
video monitor, pressing the
and then selecting items from the menu that is
displayed on the screen.
Setting the output format
This is set in the [System] menu's [Region]
option.
1
Display the [System] menu, select
[Region], and then press the SET
button.
For details on menu operations, see "Basic
Menu Operations" (page 38).
2
Press the V/v buttons to select an output
format, and then press the SET button.
z will appear in front of the currently set
output method.
A confirmation message appears.
3
Select [OK], and press the SET button.
24
Output Format Settings
4
Notes
• When you change the [Region] setting, the HD-
MENU button,
SDI and HDMI output signal formats will
return to factory default values. Be sure to
reconfigure the output signal formats if
necessary.
• Setting the unit to standby mode will be the only
operation immediately available after changing
the [Region] setting.
Setting the output signal format
Set the output signal format according to the
connected video monitor in the [System] menu's
[HD-SDI Video Format] or [HDMI Video
Format] option.
1
2
The output method is now set.
Restart the unit.
Restart the unit whenever you change the
[Region] setting.
Display the [System] menu, select [HD-
SDI Video Format] or [HDMI Video
Format], and then press the SET
button.
Select [HD-SDI Video Format] if an HD-SDI
input video monitor is connected, and select
[HDMI Video Format] if an HDMI input
video monitor is connected.
For details on menu operations, see "Basic
Menu Operations" (page 38).
Press the V/v buttons to select an output
signal format, and then press the SET
button.
z will appear in front of the currently set
output signal format.
Advertisement
Table of Contents
