Using Two Cameras To Shoot 3D Images - Sony MCC-500MD Instructions For Use Manual

Using Two Cameras to
Shoot 3D Images
You can shoot 3D images by using two units
connected as described below.
To connect two units, use a commercially-
available 75 Ω coaxial cable.
Recommended cable: 5CFB, length of 1 m (3.3 ft)
or less
1
Using a commercially-available 75 Ω
coaxial cable, connect the first unit's
3D-SYNC OUT connector on the CCU
to the second unit's 3D-SYNC IN
connector on the CCU.
Unit 1
Unit 2
2
Set the video format and image quality
settings so that they match on both
units.
Notes
• When adjusting the installation of two camera
heads, be sure to keep 3D standards in mind so
as not to adversely effect human subjects.
• Use camera cables of equal length for both of
the cameras.

Using Two Cameras to Shoot 3D Images

47