Connection With A Table-Top Vtr; Connection With A Ccu-M3/M3P Camera; Control Unit - Sony DXC-325P Service Manual

Connections
Connection with a Table-Top VTR
to micro phone
input jack
CMA-8/8CE
MiC OUT
es camera adaptor
i
Tl che
© e=asi0 9050] 0 C | to video input
VIDEO OUT
UNE
CU
sere to an AC outlet
CCQ camera cable*
(supplied or optional)
Video monitor
* The camera cable can be extended up to 30 meters (99 feet) using a DXC-325/325P
CCQ camera cable. Consult your authorized Sony deaier.
Connection with a CCU-M3/M3P Camera
Control Unit
CCU-M3/M3P DR-100 intercom
camera control unit headset (optional)
©6008
19600 |
OOOO Ky
INTERCOM
CCQ-AM
camera cable*
(optional)
CAMERA
* The camera cable can be extended up to 100 meters (330 feet) using a
CCQ-AM camera cable. Consult your authorized Sony dealer.
Notes on operation with the CCU-M3/M3P
e When the camera is connected to the CCU-M3/M3P camera When the CCU's W/B BALANCE selector is set to PRESET
control unit, set the selectors as follows: or MANUAL, it adjusts the white balance and takes priority
— VTR selector: 1 over the camera. If the W/B BALANCE selector is set to
— OUTPUT selector: VBS AUTO, the white balance can be adjusted by either the
When the camera is connected to the CCU, the following camera or the CCU.
switches will not operate: GAIN selector, BARS/WB Automatic black balance adjustment is performed by
selector, H PHASE control, SC PHASE control and SC setting the AUTO W/B BAL switch of the camera to BLK,
phase selector. irrespective of the position of the W/B BALANCE selector
¢ The MIC IN connector of the camera cannot be used as an of the CCU.
external microphone input.
DXC - 325 (UC)
1-16 DXC -325P (EK)