Using The Voice Message Center - Honeywell VISTA-20P User Manual

Function Keys
• The "A," "B," "C," and "D" keys can be programmed to perform various functions.
• Functions include: activate a panic alarm, arm the system, provide step arming,
switch lights on/off, send a message to a pager, display Time/Date, and start a
programmed Macro sequence.
Paging Feature
• If programmed, the system can automatically send certain system condition
messages to up to four (VISTA-20P Series) or two (VISTA-15P Series) pagers.
• The pager displays code numbers identifying the type of condition that has occurred.
Scheduling
• Your system can be programmed to automatically perform certain functions (e.g.,
arm the system) at a predetermined time each day.
Using the Voice Message Center (if Voice Keypad is installed)
Voice keypads feature a voice message
center that lets you record and playback
one message.
• The message can be up to 2.5-minutes
long
• The message remains in memory until
a new message is recorded.
• The volume control is adjustable.
• Refer to the procedures below when
using the Message Center functions.
Message Center Functions
To... Press these keys...
record a
message
FUNCTION
end
1 OFF
recording
RECORD
play a
message
FUNCTION
adjust the
volume
FUNCTION
volume key [3] ↑ (up) or [6] ↓ (down)
System Overview
# 0 1 OFF
+ +
VOICE RECORD
# 0 3 STAY
+ +
VOICE PLAY
# 0 2 AWAY
+ +
VOICE VOLUME
National Security Systems (800) 457-1999
SPEAKER
ARMED
LEDs
READY
MESSAGE
MIC
MICROPHONE FUNCTION
KEYS
Notes...
The red MESSAGE LED lights.
Message remains in memory until a
new message is recorded.
The red MESSAGE LED flashes,
indicating message waiting.
The recorded message plays and the
red MESSAGE LED turns off.
Adjusting message volume also
adjusts status volume. Volume
, then press
cannot be adjusted while playing.
(cont'd)
LCD
DISPLAY
1 2 3
OFF AWAY STAY
RECORD VOLUME
PLAY
4 5 6
MAX TEST BYPASS
7 8 9
INSTANT CODE CHIME
0 #
READY
STATUS VOICE FUNCTION
– 7 –