Honeywell VISTA-20P User Manual page 44

Ademco vista series
Hide thumbs Also See for VISTA-20P:
Table of Contents

Advertisement

Trouble Conditions
Other Trouble
Displays
(Continued)
Total Power Failure
In The Event Of Telephone Operational Problems
In the event of telephone operational problems, disconnect the control from the phone line by
removing the plug from the phone wall jack. We recommend that your installer demonstrate this
disconnection on installation of the system. Do not attempt to disconnect the phone connection
inside the control. Doing so will result in the loss of your phone lines. If the regular phones work
correctly after the control has been disconnected from the phone wall jack, the control has a
problem and you should immediately call for service. If upon disconnection of the control, there is
still a problem on the phone line, notify the Telephone Company that they have a problem and
request prompt phone repair service. The user may not under any circumstances attempt any
service or repairs to the security system. Repairs must be made only by authorized service (see
the LIMITED WARRANTY statement for information on how to obtain service).
– 44 –
(cont'd)
AC LOSS
(or NO AC)
Busy-Standby
(or dI)
OPEN CIRCUIT
(or OC)
Long Rng Trbl
(or bF)
TELCO FAULT
(or CHECK 94)
If there is no keypad display at all, and the READY indicator is not
lit, operating power (from AC and back-up battery) for the system
has been interrupted and the system is inoperative. CALL FOR
SERVICE.
National Security Systems (800) 457-1999
The system is operating on battery power
only due to an AC power failure.
If only some lights are out on the
premises, check circuit breakers and
fuses and reset or replace as necessary.
If AC power cannot be restored and a
"low system battery" message appears
(see previous page), CALL FOR
SERVICE.
If this message remains displayed for
more than 1 minute, system is disabled.
CALL FOR SERVICE.
The keypad is not receiving signals from
the control. CALL FOR SERVICE.
If part of your system, back-up
communication device has failed.
CALL FOR SERVICE.
The telephone line has a problem.
CALL FOR SERVICE.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vista-15pVista-20psiaVista-15psia

Table of Contents