Honeywell VISTA-20P User Manual page 13

11. # This key can be used for "Quick
Arming" of the system without use of a
security code (if programmed).
[FUNCTION] On Voice keypads, enables
the desired voice or volume function.
12. 0
[VOICE] On Voice keypads, enables the
RECORD, VOLUME and PLAY
functions.
13. ∗
Used to display all open
READY
protection zones.
[STATUS] On Voice keypads, a
momentary press of the STATUS key
annunciates the current system status.
Pressing the STATUS key a second
time annunciates and displays system
and/or zone faults (if they exist).
14. KEYS 0–9: Used to enter the security
code(s) and to perform their associated
system functions.
Functions of the Keypads
15. MIC
16. MESSAGE LED INDICATOR: (RED)
17. READY LED INDICATOR: (GREEN)
18. ARMED LED INDICATOR: (RED)
19. FUNCTION KEYS: Keys A, B, C, D
20. INTERNAL SPEAKER: The built-in
National Security Systems (800) 457-1999
On voice keypads, microphone for
Message Center recordings.
On Voice keypads, flashes red when
message waiting or lights red (steady)
when in record mode.
Lit when the system is ready to be
armed (no faults present). While the
system is disarmed, this indicator will
go on and off as protection zones are
closed and opened.
Lit when the system has been armed.
may have been programmed for a
variety of functions, including panic
(emergency) functions. For details, see
the Function Keys section.
speaker mimics the alarm sounder
during alarms, and will also "beep"
during certain system functions. The
speaker also provides voice playback for
any recorded messages.
(cont'd)
– 13 –