Honeywell VISTA-20P User Manual page 12

Functions of the Keypads
NOTE: The functions printed directly on the
keys indicate their primary
functions printed under some of the keys (shown
in brackets under the respective key), indicate
their alternate or secondary purpose.
1. DISPLAY WINDOW
Alpha Display Keypads: 2-line, 32-
character Liquid Crystal Display (LCD)
keypads that display protection point
identification, system status, and
messages.
Fixed-Word Display Keypads:
Display protection zone ID and system
status messages using pre-designated
words in the LCD display area.
2.
1
Disarms burglary portion of
OFF
the system, silences alarms and audible
trouble indicators, and clears visual
display after problem's correction.
[RECORD] On Voice keypads, used in
conjunction with the FUNCTION and
VOICE keys to record up to a 2.5-
minute message.
3.
2
Arms the entire burglary
AWAY
system, perimeter and interior.
[VOLUME] On Voice keypads, used in
conjunction with the FUNCTION and
desired volume control keys ↑ [3] or ↓
[6] to adjust the volume of a recorded
message or voice system status.
4. Arms perimeter portion of
3
STAY
burglary system only. Interior
protection is not armed, allowing
movement within premises without
causing an alarm. If pressed twice in
succession, arms system in Night-Stay
mode.
– 12 –
purpose; the
5.
6.
7.
8.
9.
10. 9
National Security Systems (800) 457-1999
(cont'd)
[PLAY] On Voice keypads, used in
conjunction with the FUNCTION and
VOICE keys to play the recorded
message.
[ ↑ ↑ ↑ ↑ ] On Voice keypads, used in
conjunction with the FUNCTION and
VOLUME keys to raise the message
and voice system status volume.
Arms the entire burglary
4
MAX
system, perimeter and interior, but
without entry delay feature. Entering
via an entry/exit door will cause an
alarm.
5 Tests the system and alarm
TEST
sounder if disarmed. Refer to Testing
The System section for test procedures.
Removes individual
6
BYPASS
protection zones from being monitored
by the system.
[ ↓ ↓ ↓ ↓ ] On Voice keypads, used in
conjunction with the FUNCTION and
VOLUME keys to lower the message
and voice system status volume.
Arms in manner similar to
7
INSTANT
the STAY mode, but without the entry
delay feature.
Entering via an entry/exit door will
cause an alarm.
8 Used to assign additional
CODE
security codes and attributes for other
users of the system.
Turns CHIME mode on and
CHIME
off. When on, the opening of windows or
doors while the system is disarmed will
sound 3 beeps at the keypad(s).