Safety Switch-Off - Miele KM 6220 Operating Instructions Manual

Ceramic
Table of Contents

Advertisement

Safety switch-off

Safety switch-off if the sensors are covered
Safety switch-off with an over-long cooking time
Your hob will switch off automatically if one or several of the
sensors remain covered for more than about 10 seconds, for
example by finger contact, food boiling over, or by an object
such as an oven glove or a tea towel.
An F will flash in the timer display.
^ Clean the control panel or remove the obstruction.
F goes out, and you can now use the hob again.
If one of the cooking zones is heated for an unusually long
period of time (see chart) and the power level is not altered,
the hob will switch itself off automatically and the relevant
residual heat indicator will light up.
To use the cooking zone again, switch it back on in the usual
way.
The appliance is delivered with 0 power levels programmed
as standard. If required you can set a higher safety setting
with a shorter maximum operating time (see the table).
Safety features
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km 6226Km 6223Km 6227Km 6229Km 6230Km 6224

Table of Contents