Set Menu; Operating Your Opal ™ 670 Sewing Machine - Husqvarna Viking Opal 670 User Manual

SET MENU

You can change the pre-set machine settings and make
manual adjustments to the automatic functions in the SET
Menu. Open the menu by pressing SET Menu (E). Select the
setting you wish to adjust by pressing the up/down Navigator
Arrows. To activate the function, press OK to place an X in
the box. To cancel the function, press OK again to leave the
box empty. Use the right/left Navigator Arrows to change
the number settings by toggling through the available options.
Press SET Menu again to close the SET Menu.
Note: When a number is set to default the fi gures will be black. If you
change the number the fi gures will be inverted on a black background.
FIX Auto
Press OK to turn on or off the automatic FIX function in the
beginning of each stitch. The setting will go back to default
when the machine is turned off.
Twin Needle
If you are using a twin needle, set the size of the needle to
limit the width of all stitches and prevent needle breakage.
Activate or deactivate the twin needle function with OK and
use the left/right Navigator Arrows to set the twin needle size.
Your setting will be saved also when the machine is turned off.
A pop-up message reminds you of the setting when you turn
on the machine. Close the pop-up message by pressing OK.
Note You cannot set the twin needle size if the Stitch Width Safety
:
is on, or turn on the Stitch Width Safety if the machine is set for twin
needle.
Stitch Width Safety
Use OK to turn on the Stitch Width Safety when using a
straight stitch needle plate or a straight stitch presser foot.
The stitch width will be limited to zero for all stitches to
prevent damage to the needle, presser foot and needle plate.
This setting is saved when the machine is turned off. A pop-
up message reminds you of the setting when you turn on the
machine. Close the pop-up message by pressing OK.
Buttonhole Balance
If the Sensor One-Step Buttonhole Foot is not connected or
if you select stitch 1:24, the columns in the buttonhole stitch
will be sewn in different directions. On some fabrics this may
cause the columns to appear with different density.
Use the left/right Navigator Arrows to balance the density
between -7 and 7.
The changes only affect the selected stitch. If another stitch is
selected or the same stitch is selected again, the value is reset
to the default value.
30 – Operating your Opal 650
™
Audible Alarm
Turns on or off all alarm sounds of the machine. Default
setting is on. This setting is saved even if the machine is
turned off.
Contrast
Adjust the contrast of the GraphicDisplay by using the left/
right Navigator Arrows.
The value can be set between –20 to 20 in steps of 1. The
setting is stored even when the machine is turned off.
Language
Use the left/right Navigator Arrows to change the language
of all text in your machine.
The language setting is saved even if the machine is turned
off.
Software Version
The software version currently loaded for the sewing machine
is displayed.
E