Toshiba e-Studio 281c Operator's Manual page 261

Basic functions
Hide thumbs Also See for e-Studio 281c:
Table of Contents

Advertisement

Error code
Problem
2C72
POP Before SMTP
error
2C80
Failed to process
received E-mail job
2C81
Failed to process
received Fax job
2CC0
Job canceled
2CC1
Power failure occurred
Save as File
2D10, 2D12,
Illegal job status
2D13, 2D20-
2D22
2D11
Not enough memory
2D14
Invalid parameter
specified
2D15, 2D65
There are too many
documents in the
folder. Failed in creat-
ing new document.
2D30
Failed to create direc-
tory
2D31, 2D33
Failed to create file
2D32
Failed to delete file
2D40
Failed to convert
image file format
2D60
Failed to copy file
2D62
Failed to connect to
network destination.
Check destination
path.
2D63
Specified network path
is invalid. Check desti-
nation path.
2D64
Logon to file server
failed. Check user-
name and password.
2D66
Failed to process your
job. Insufficient disk
space.
Check if the settings of POP Before SMTP and POP3 are cor-
rect.
Ask your administrator to confirm whether the Received Internet
Fax Forward is set.
Ask your administrator to confirm whether the Received Fax
Forward is set.
Job was canceled.
Make sure that the power cable is connected properly and it is
inserted securely. Resend the job.
Turn the power OFF and then back ON.
Retry sending. If the error still occurs, contact your service rep-
resentative.
Make sure there are enough memory to save the scan job.
Make sure you specify the settings correctly and try again.
Delete the data in the local shared folder in the equipment and
retry the scan.
Make sure that the access privilege to the storage directory is
writable and the server or local disk has a sufficient space. Then
retry the scan.
Make sure that the access privilege to the storage directory is
writable and the server or local disk has a sufficient space. Then
retry the scan.
Make sure that the access privilege to the storage directory is
writable and the server or local disk has a sufficient space. Then
retry the scan.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Check destination path.
Make sure that the network path is correct, and retry the scan. If
the error still occurs, ask your administrator to confirm whether
the IP address or path of the server is correct. Also make sure
that the server is operating properly.
Make sure you specify correct network folder and retry the scan.
Make sure you specify correct user name and password to
logon the file server and retry the scan.
Delete the data in the local shared folder in the equipment and
retry the scan.
What to do
8
259

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 351cE-studio 451c

Table of Contents