Toshiba e-Studio 281c Operator's Manual page 307

Lower the guide while holding the knob.
3
A: Stapling area
Do not touch the stapling area. The stapler could injure you.
4 Remove any jammed staples.
5 Hold the knob and raise the guide, and
then return the guide to its original posi-
tion.
Install the staple cartridge into the sta-
6
pler.
• Insert the cartridge until it is caught by the latch and fixed with a
click sound.
Install the finisher to the equipment.
7
Be careful not to let your fingers be caught between the equipment and the finisher (optional). This could injure
you.
A
10
305