Toshiba e-Studio 281c Operator's Manual page 51

Changing the setting of paper size
If the setting of the paper size registered in the equipment does not correspond to the one in the drawer, it
could cause a paper jam. In this case, change the setting of the paper size according to the following pro-
cedure.
Press the [USER FUNCTIONS] button on
1
the control panel.
2 Press the [USER] button on the touch panel to enter the user setting
menu and then press the [DRAWER] button.
Press the drawer on the touch panel corresponding to the one in
3
which the paper size has been set, and then press the button indicat-
ing the new one.
1
49