Toshiba e-Studio 281c Operator's Manual page 301

Take the empty staple case out of the sta-
3
ple cartridge.
4 Install a new staple case into the staple
cartridge.
• Insert the new case into the cartridge until you hear a click
sound.
• Do not remove the seal bundling the staples until the new staple
case is installed into the cartridge.
5 Remove the seal bundling the staples
and then pull out the seal straight
upward.
Install the staple cartridge into the sta-
6
pler.
• Insert the cartridge until it is caught by the latch and fixed with a
click sound.
If "Check staple cartridge" remains, repeat the above procedure
from steps 1 to 6.
7 Install the finisher to the equipment.
Be careful not to let your fingers be caught between the equipment and the finisher (optional). This could injure
you.
10
299