When Using The Multifunctional Digital Colour Systems - Toshiba e-Studio 281c Operator's Manual

General Precautions (Cont.)

When using the Multifunctional Digital Colour Systems

Warning
• Do not place metallic objects or containers with water (flower vases, coffee cups, etc.) on or near the
Multifunctional Digital Colour Systems. And keep paper clips and staples away from the air vent. This
could cause a fire or give you an electric shock.
• If the Multifunctional Digital Colour Systems becomes excessively hot, smoke comes out of it or there
is an odd smell or noise, proceed as follows.
Turn the main switch OFF and remove the plug from the outlet, then contact your service representa-
tive.
• If the Multifunctional Digital Colour Systems will not be used for more than one month, remove the plug
from the outlet for safety purposes during that time.
This could cause a fire or give you an electric shock if an insulation failure occurs.
Caution
• Do not place heavy objects (4 kg or more) on the original glass and do not press on it with force.
Breaking the glass could cause personal injury.
• Do not place heavy objects (4 kg or more) on the Multifunctional Digital Colour Systems. If the objects
fall off, this could cause injury.
• Do not remove or connect the plug with wet hands, as this could give you an electric shock.
• Do not touch the fuser unit or the metal area around it. Since they are very hot, you could be burned or
the shock could cause you to get your hand injured in the machine.
• When changing the angle of the control panel, be careful not to catch your hands in the gap between
the equipment and the control panel. This could cause personal injury.
• Be careful not to let your fingers be caught when closing the drawer. This could injure you.
• Be careful not to let your fingers be caught between the equipment and the finisher (optional). This
could injure you.
• Be careful not to let your fingers be caught between the equipment and the automatic duplexing unit.
This could injure you.
• Do not place 3 kg or more of objects on an optional work table. Breaking the work table could cause
personal injury.
• Do not touch the metal portion of the guide plate in the automatic duplexing unit as it could burn you.
14